Temp guage high, blowing cold air

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
My heating wasnt working yesterday, just realised why. She been stood a week and the cooling system had frozen!
 
i had this trouble other week for 3 mornings,engine was up temp for a good half hour before warm air started blowing through,recon it was ice in heater box cos since i topped up cooling system with antifreeze its not done it(touch wood)
 
coolent looks fine. the temp actually got in to the red just as i got home. what are the solution to airlock and "unfreezing" the system?
 
right, i've gone to change the thermostat and theres nothing there! what do you reckon now? airlock or waterpump?
 
the hoses seem to be getting warm yes. the only ones that dont seem warm is the thin 1 from the header to stat housing and the one from stat housing to water pump. dont know if this is normal, first disco i've had and only got it sat night.
 
you've got problems then as they should get warm first?? It sounds like you're not getting any water circulating?? take the bleed cap of the rad and have a look to see if the waters moving.
 
yea will do as soon as i can find a socket to fit, got bigger and smaller, typical! worth lookin at water pump?
 
took the bungs out and filled up, warmed engine up and the header tank filled up and water was coming out of the cap. Took bungs out again, rad was still full, stat wasnt. Also the to pipes as mentioned before were still cool.
 
Coolant may have frozen in water pump housing while vehicle parked o'nite, water pump impellor vanes broken off when engine turned over to start, no pumpie coolant, no coolie engine, no ciculation for heater, just a thought, but you have said that you will replace said pump all will then be revealed. Good luck!!
 
a friend is going to do it for me tomorrow as i am working now so dont have the time, see what happens! will keep you posted!
 
well friends had a look and the headgasket that was supposed to have been fixed before i picked it up, don't look like it has been done. Since i put thermostat in you can see water escaping onto exhaust manifold/turbo, i presume this is due to increased pressure with stat in. Also the head bolts havent been touched.
 
Back
Top