ingy
New Member
- Posts
- 13
- Location
- Lancashire
Had the battery disconnecyed on my TD5 and now the radio just displays EP-E02 all the time. I get no sound and it does not respond to anything. Has anyone seen this before?
TD5 Radio problem
- Thread starter ingy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Bromsgrove Defender
Well-Known Member
- Posts
- 5,759
- Location
- Out to lunch
loose battery connection 
ingy
New Member
- Posts
- 13
- Location
- Lancashire
The battery has been disconnected and reconnected three or four times since and still the same problem.
discool
Well-Known Member
- Posts
- 13,492
Yup thats it as... BD ^^^^^^^
A problem with radios fitted in the Rover/MG cars but a new one for me with LRs.
OR just remove and reconnect the + at the battery to reboot.
A problem with radios fitted in the Rover/MG cars but a new one for me with LRs.
OR just remove and reconnect the + at the battery to reboot.
Bromsgrove Defender
Well-Known Member
- Posts
- 5,759
- Location
- Out to lunch
Is it not a symphony then?
Thought they were the only ones that come up with that code??
Assuming it is then.
You disconnect your battery to do what ever work needs doing.
On reconnecting if you get the EP-E02 code you will need to disconect the battery and wait at least ten minutes. then reconnect.
If your still getting the EP-E02 code then check t'other end of the wiring and or Disconnect the battery again and check for continuity ( battery to radio )
Thought they were the only ones that come up with that code??
Assuming it is then.
You disconnect your battery to do what ever work needs doing.
On reconnecting if you get the EP-E02 code you will need to disconect the battery and wait at least ten minutes. then reconnect.
If your still getting the EP-E02 code then check t'other end of the wiring and or Disconnect the battery again and check for continuity ( battery to radio )
