TD5 Fuel water sensor.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

meego

Well-Known Member
Posts
9,872
Location
Caledonia
This is leaking on mine. Thought I would get away with a new rubber washer (part No WJN101860 in case anyone needs one) but no luck. £38 for a new one. My question is.
Going to plug the fuel filter with a bolt to keep me on the road till new sensor comes. I can't think of any reason why it should cause any problems short term. Any thoughts on this? cheers.
 
This is leaking on mine. Thought I would get away with a new rubber washer (part No WJN101860 in case anyone needs one) but no luck. £38 for a new one. My question is.
Going to plug the fuel filter with a bolt to keep me on the road till new sensor comes. I can't think of any reason why it should cause any problems short term. Any thoughts on this? cheers.

A couple of things:

1. Blocking the hole in the bottom of the filter with a short bolt shouldn't do any harm, short term.

2. Every time you buy a new fuel filter it will come with a white plastic tap which can be used instead of the black plastic sedimenter. No more warning light !!!!
 
A couple of things:

1. Blocking the hole in the bottom of the filter with a short bolt shouldn't do any harm, short term.

2. Every time you buy a new fuel filter it will come with a white plastic tap which can be used instead of the black plastic sedimenter. No more warning light !!!!

Landrover Discovery Fuel filer water sensor WKW500070 on eBay (end time 18-Feb-11 15:37:46 GMT)

Here you go if you change your mind. ( as a much lower price can do ! )

Dont over tighten them.


Del.

Thanks guys. Bolt is on, but will probably replace sensor. Thanks for link 50p. I've contacted seller and asked if its an OE part. Doubt it at the price but got to be better than a bolt. :)
 
Thanks guys. Bolt is on, but will probably replace sensor. Thanks for link 50p. I've contacted seller and asked if its an OE part. Doubt it at the price but got to be better than a bolt. :)

The one I got from them had the same name stamped into it as the one that came off.

Del.
 
That may not mean that one I took off was a genuine one, but it was alright for 3 years till I over tightened the bugger !.

Del.

No problem. The guy got back to me saying its a Bearmach or All-Makes4x4 so I ordered two as a mate needs one as well. I will be keeping the plastic screw off the next new filter I fit though as a back up.
 
Back
Top