td5 03 from air bag to srings

hi all
i had prob with my air bags surpensone so fitted 2"lift kit
now when i drive down the road and go over 25 mph it keeps beeping and have a lite on the dash is there away to stop this and if so how do u do it
thanks dave

I presume you have replaced the airbags with coils.
Sounds like you need to tell the air ECU that you have changed it. The ride height sensors will be telling it that it is in "Off Road Mode" i.e. full height and as soon as you exceed 18mph (I think) it will be trying to reduce the ride height back to normal.
Track down someone near you with Hawkeye (there is a list somewhere) and they may be willing to help you out for a nominal charge.

hi
right i have a hawk eye myself just not to sure how to use it properly
can any one tell me how to do this then

Found the list!
www.discovery2.co.uk/ Nanocom Locator, get help from your Land Rover Buddies!!!

However, I have been told that nanocom doesn't do air suspension where as Hawkeye does

oops bit slow me.
I emailed one or two of the guys off this list to ask their advice re Hawkeye/Nanocom and they were very informative (as most Landy owners seem to be)
I suggest choosing one with the same model as you have and mail them. You will probably get the help you need.
I cant help cos my Hawkeye has not yet landed (Grrrrrrrrrr)

Tids said:

hi all
i had prob with my air bags surpensone so fitted 2"lift kit
now when i drive down the road and go over 25 mph it keeps beeping and have a lite on the dash is there away to stop this and if so how do u do it
thanks dave

Click to expand...

From memory, you go to Suspension in the main menu, then Programing, then Configration and select coils.

Del.

ABS from main menu, which accesses the SLABS ecu, which does suspension and abs.

From there, as stated above.

Clear any faults first, then change configuration. couple of steps to confirm it.

MW

ok been out with the hawk eye and still not done the job when i go in to surpension there is no program in that menu my hawkeye is running on 3.0.0 softwear dose it need a update?
if i go in security then program there is a setting for hd/slabs it can be on or off

Tids said:

ok been out with the hawk eye and still not done the job when i go in to surpension there is no program in that menu my hawkeye is running on 3.0.0 softwear dose it need a update?
if i go in security then program there is a setting for hd/slabs it can be on or off

Click to expand...

ABS menu > Programminng > Configuration

They didnt name a menu Suspension for Disco 2 cos it's managed by the (SL)ABS ECU

steadyaway said:

Found the list!
www.discovery2.co.uk/ Nanocom Locator, get help from your Land Rover Buddies!!!

However, I have been told that nanocom doesn't do air suspension where as Hawkeye does

Click to expand...

Actually, Nanocom does MORE with the SLS than Hawkeye can do. and there is 2 places to tell the car its on air, in the SLABS as already mentioned and also in the BCU.

My hawk eye not let me do this dose it need a update then it's runing 3.0.0

In this case u better call tech support and they must send u an upgrade CD(this one is free but u need the cable for it which will cost u some money)