Series 1 3 door

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

ruffday

Active Member
Posts
901
Location
Sheffield
Hi all well im getting to grips with my latest Disco and its going to take a bit of work.
The wiring is in a state due to previous owners bodges.
Well ive ripped out the laserline system. The LPG needs looking at as it looks like a birds nest.
Ive stripped out the interior and dash as it needs a new matrix.
The body is pretty solid as its had loads of welding done in the past and to a good standard by the looks of it. The boot floor has been done properly as well.

Anyway i think it may have had a lift kit fitted but cant see any stickers on the shocks.

Can someone tell me the height from the ground to the front and reat arches on a standard disco.

Mine is a 1990 3dr V8 with freestyle alloys and 235/70r16 tyres fitted.

Many thanks
 
Can someone tell me the height from the ground to the front and reat arches on a standard disco.

Mine is a 1990 3dr V8 with freestyle alloys and 235/70r16 tyres fitted.

Many thanks


Surely the simplest option would be to measure the spring free length and compare it to the sizes on the LR sprong specs guide on here??? As no two discos will be same height. if the springs are ****part ones they could have started out as +2" and still be same length as std springs. Have the springs got any colorcoded stripes painted on them..
 
Surely the simplest option would be to measure the spring free length and compare it to the sizes on the LR sprong specs guide on here??? As no two discos will be same height. if the springs are ****part ones they could have started out as +2" and still be same length as std springs. Have the springs got any colorcoded stripes painted on them..


Maybe if i had the springs off but since the weather is poor and i have all the interior all over my garage I thought i would just get a rough idea off someone.
And someone has neen kind enough to check for me.
 
Back
Top