radius arms

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

cobboy

New Member
Posts
43
hi all recently disco 1 300tdi auto for it's mot it passed with an advisory which says rear(front bushes both sides) radius arm rubber bush deteriorated but no excessive movement . in my normal way of charging straight in ithink i have changed the wrong ones i have done the ones attached to the front axle :doh:. took me two bloody days .was just reading apost about rear radius arms and thought o dear , please advise

p.s i do not want to stick originals back in had a big enough nightmare with the fronts :mad:
 
sounds like triangle bushes chassis to arm ,they are just bolt on and off ,you should allways do both sides with suspension and brakes
 
hi i did both sides driver & passenger two on the half moon shape that fits rond the front axle and then the ones at the other end two that fit on thr threaded shaft . what i am tying to figure out is have replaced the ones that needed doin or have i made a bit of a fupar , if anyone has pictures of what i need to change it would be reallly helpfull as not to good with whats what yet sorry :doh::doh:
 
the ones i did are in busters photo section front radius arm bushes renewal,

the mot says = rear (front bushes both sides) radius arm rubber bush deteriorated but not excessive

if it is not the ones i have done which is it , please :confused:
 
thank you . hopefully there a bit easier than the ones i have aleady done , steep learning curve but all good fun:rolleyes:
 
Back
Top