pinion oil seal tool

Quick question (I hope). Before I strip down to replace the front oil pinion seal tomorrow, does anyone know what diameter/size socket I need instead of tool LRT-51-010 to fit the new seal ?
thanks

iirc I used my 52mm hub nut socket

DO NOT PUSH IT IN TOO FAR !.

It only sits a couple of mm back from the drive flange. ( take note of the old ones position ).

I knocked my new one flush to the casing then tightened the drive flange onto it to drive it in square. Then I took the flange back off and put a 2mm washer I,d made in and, once again, drove the flange back on thus leaving the seal 2mm back from the flange dust seal. Whipped it back off again, took out the washer, and tightened the flange on properly.

I posted a thread on it somewhere with pics.

Del.

Many thanks Guys - I searched before posting but couldnt find the level of detail you mentioned. However, i've now searched your old posts and found it - cheers!. This is very hel;pful thanks _ I've not yet got at 52mm socket, so time to improve my tool box. )

I dont know how to post links, but if you do a search for " Front diff pinion seal ", you,ll see my thread.

Del.