My Project

What's up guys im 15 and I live in Bristol and I own a land rover discovery 200mpi and im going to convert it to a 200tdi if anyone wants a 2.0l petrol engine please ask thanks im going to convert it eventually but that's not the project I have loads of help from my mums boyfriend who earns a living from landy's and occasionally from his dad who is a lorry driver but my project is going to turn my disco into a bobtail pickup like the one in the pic so I want to go greenlaning and pay & play days but anyway feel free to leave comments and tips/hints

matt

Im going to Update This Thread every new bit of work here is the photos from today ( 29/07/14 )[/URL][/IMG]

Today again ( 29/07/14 )[/URL][/IMG]

Work From Sunday ( 27/07/14 )[/URL][/IMG]

Sunday Work Again (27/07/14 ) [/URL][/IMG]

looking to be a good project.good luck with it and please, keep the pics and updates coming.

ron.

I will do don't you worry hahaha and thanks

matt

mattyf0301 said:

Im going to Update This Thread every new bit of work here is the photos from today ( 29/07/14 )

[/URL][/IMG]

Click to expand...

I like the look of where this is going Matt. My old rusty Disco is going to be heading this way too one day.
Can you explain the wheelie bin on the front though?
Is it to keep ya ropes handy or to ensure that nobody kicks ya lunch (which would be otherwise on the back?

cheers Bruce:cool2:

thanks bruce hahaha no its bin day and there is a trailer behind so I had to push the landy near the bins sorry haha and yeah on the back you can kinda see where im going to bobtail and the pillars are going to be cut off it was just so I could cut the roof off

matt

bobtailed [/URL][/IMG]

please feel free to post

matt

A fantastic project - especially as you are only 15. When I was that age, I didn't know my arse from my elbow! Well done!

Looking good so far. I used a sheet of steel for my rear with box section supports inside.
you can weld al the panels apart from the external wings fyi.
and yea pretty epic for a 15y old!.

cheers mark nice trayback u have there

Looks like a cool project. i started one recently which is abit like yours but a tray back. Get ready for ALOT of work mine is in the pic below.

Oh yea. and keep us posted cant wait to see updates.

Josh859 said:

Looks like a cool project. i started one recently which is abit like yours but a tray back. Get ready for ALOT of work mine is in the pic below.

Click to expand...

Any tips for the tray back conversion? It will eventually be happening to mine as it becomes a challenge truck. going to be doing something a little different though I recon.

my only tip is to start with a non rusty car but its abit late for that lol. i dont really know what im doing, iv'e just made it up as iv'e gone along.

mine Was a surprise I didn't have hardly any rust the guy before did quite a good job but if I was you josh I would get an external roll cage i can see you started to get one but with my roll cage like im going to get one that runs into the tub like this orange one

oh aswell josh if I was going to make a trayback it would be like this pic but nice work I like yours aswell must as spent loads on it