How to run breather pipes up safari snorkel

Hi

Just after a bit of advice on how to run the extended breather pipes up a safari snorkel on a 200tdi disco.

I have fitted a manifold in the engine bay which the breather pipes connect into so have 1 8mm pipe to get up the snorkel.

What is the best way to do this ?

Thanks

slacken the windscreen bracket off and push pipe behind snorkel retighten bracket and run a bead of Black RTV silicone between snorkel and windscreen pillar..

tiewraps up the outside and in at the top.

The Mad Hat Man said:

tiewraps up the outside and in at the top.

Click to expand...

looks ****e. though mine is invisible for 90% of it's route up the pipe.

redhand said:

looks ****e. though mine is invisible for 90% of it's route up the pipe.

Click to expand...

like all things, Pikey - depends how it is done. Ive seen ****e RTV jobs anorl.

You can just see the breather appearing near the top of the Snorkel.

I also threaded the tubing inside the rubber seal on the wing at the back of the engine bay

redhand said:

You can just see the breather appearing near the top of the Snorkel.

I also threaded the tubing inside the rubber seal on the wing at the back of the engine bay

Click to expand...

some fooker has glued boot laces all over the middle of your bonnet!

G-man said:

some fooker has glued boot laces all over the middle of your bonnet!

Click to expand...

That's the crotch from Tweet's fishnet stockings.

Thanks for the advice.

I always thought that they were somehow routed into the snorkel itself from the engine bay and run up inside the snorkel.