discovery 1 lt77 gearbox OMG i need assistance

right heres the story i gtot a petrol disco 1 2ltr with an lt77 gearbox wich is truely knackered

i have a replacement box ( lt77) out of another disco 1 200tdi wich means the input shaft from the flywheel / clutch is a lot shorter than the original one

now my only option is to swap the input shafts to get over this problem but it means a full strip down and rebuild

i cannot find any literature on this nor a procedure so has anyone got any experience with stripping these gearboxes just to swap the shaft or am i in uncharted territory with this

any advice or input would be greatly appreciated at this moment in time as im cacking me pants with the image im gonna split this box tomorrow and evrything is gonna hit the floor with springs n clips n **** vacating the premises at warp speed

Just put a 200 in it.

I have a lt77 disco box you can have for scrap value,
Pick up from TQ12

I agree, stick the 200 in it. The 2L petrol is good for nothing but drinkin

MrPDude said:

I agree, stick the 200 in it. The 2L petrol is good for nothing but drinkin

Click to expand...

just got the thing te sell on it just needs a working gearbox and its only done 67.000 miles so its a trial by hell fire really

i replied to your other post