can anyone help- loom ecu oil problems

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
W

wardens

New Member
Posts
4
Location
stourport worcestershire
vehicle was misfiring, local garage (stourport) telling me new loom £350 plus , final bill may be thousands !!!!!! Can anyone help me i clueless on all this. Garage says over 5ft of damage , wires burnt and oil upto the ecu ? they say huge job . Can anyone out there help me on this as i know one thing i do not have these kind of funds to repair, not sure if being led astray. anyone local can do this repair for a reasonable amount. hazel
 
I have never heard of the ECM loom having burned wires. Oil transmitted down th ewires by capillary action is common tho.
I believe it is usually washed out with petrol or something similar. the ECM connectors also need cleaning out.
I think that the main problem is with the injector loom and not the ECM loom, but others with more knowledge than I can tell you more.
 
wardens said:
vehicle was misfiring, local garage (stourport) telling me new loom £350 plus , final bill may be thousands !!!!!! Can anyone help me i clueless on all this. Garage says over 5ft of damage , wires burnt and oil upto the ecu ? they say huge job . Can anyone out there help me on this as i know one thing i do not have these kind of funds to repair, not sure if being led astray. anyone local can do this repair for a reasonable amount. hazel
Click to expand...


Hello Hazel, the first thing I would be doing is no matter what it took, get your car away from this garage !!!!!!! They are being lazy and may not know Discoverys as well as they would have you believe.

First of all can you please confirm the following:

Year of vehicle:- ?
Engine type:- TDi, TD5 diesel or V8 petrol?
Gearbox:- manual or auto?

This gives us a basis on which to work, so reply asap please

Cheers
Dave
 
Engine harness(YSB108710), not cheap but it wont bankrupt u, a good OEM one is £160(just replaced mine) so far from £350(even the genuine LR is £215)....it's not a killer to replace it too....i did it alone in about 3 hours without big hurry. So those guys are fookin thiefs.
 
sierrafery said:
Engine harness(YSB108710), not cheap but it wont bankrupt u, a good OEM one is £160(just replaced mine) so far from £350(even the genuine LR is £215)....it's not a killer to replace it too....i did it alone in about 3 hours without big hurry. So those guys are fookin thiefs.
Click to expand...


On the face of it Fery, it's just another example of lazy incompetent rip-off garages. I really really dislike this.

The car I have now was looked after by a 'specialist LR' garage- the only thing they were specialist at doing was ripping-off the previous owner!

Simple example: replacing the 4 filters air, 2x oil and fuel filter £89+vat (LR genuine filter prices) but what was installed you may ask? Britpart ones all 4 - cost £16+vat from Paddocks; maybe even cheaper if you are trade. I reckon this is theft.

Dave
 
thebiglad said:
Hello Hazel, the first thing I would be doing is no matter what it took, get your car away from this garage !!!!!!! They are being lazy and may not know Discoverys as well as they would have you believe.

First of all can you please confirm the following:

Year of vehicle:- ?
Engine type:- TDi, TD5 diesel or V8 petrol?
Gearbox:- manual or auto?

This gives us a basis on which to work, so reply asap please

Cheers
Dave
Click to expand...
Hi Dave , the year is 2001, td5 gs auto. garage intending to change main loom as they say it had been left so long the plastic coating had melted and the injection loom. they say may still have problem with the fuel pressure even after the work is done?. told them to only fit what they had ordered as i had agreed before i found this forum (doh) will not take vehicle there again i have no confidence in them. remain worried i will have vehicle i can drive, need find local help that is reasonable price. vehicle had service history.
 
wardens said:
Hi Dave , the year is 2001, td5 gs auto. garage intending to change main loom as they say it had been left so long the plastic coating had melted and the injection loom. they say may still have problem with the fuel pressure even after the work is done?. told them to only fit what they had ordered as i had agreed before i found this forum (doh) will not take vehicle there again i have no confidence in them. remain worried i will have vehicle i can drive, need find local help that is reasonable price. vehicle had service history.
Click to expand...


Hi Hazel and thank you for the info. I can understand that you feel bound to continue if you gave the go-ahead for the garage to order the engine harness, but I would strongly counsel you to establish with them a time-frame for fitting it, otherwise you will be at their mercy.

So, if it was me I would confirm with them the price they are going to charge you A; for the engine harness and B. for the labour.

Without the VIN I can't be absolutely sure of the part no. - they change dependant on specification and production date:

YSB108710 £259.09+vat

YSB108710 HARNESS ENGINE TD5 | shop | www.lrseries.com | L. R. Series

2 hours labour should more than cover it.

Also the injector loom harness AMR6103, can be bought at many outlets for approx £30 inc vat. The genuine Land Rover part is listed at £42.94+vat.

The 2 "O"-rings that cause the problem are: NYX100080 - £1.34+vat each.


Remember Hazel that KNOWLEDGE IS POWER, up to now they have had the power - that does not need to continue !!

Any help or info that I can provide, I will.

Cheers
Dave
 
Thank you for all the helpful replies. eventually repaired by local garage (at a huge cost) main and injector loom replaced along with fuel pump & filter. Had i looked to this site earlier i could have saved money as believe main engine loom did not need replacing. This is an excellent forum, thanks again
 
You must log in or register to reply here.

Similar threads

V
Disco 2 Discovery 2 TD5 Misfiring and smoking
2
Replies
35
Views
3K
sierrafery
sierrafery
B
Smart Key Issue - Disco 4
Replies
0
Views
741
BourneFree
B
LandySurf
90 TD5 Fob Keys - Can anyone help?
Replies
3
Views
1K
Anaconda
A
CM33
Hi there everyone. Can anyone help a Manchester LR owner please
Replies
1
Views
580
brianp38dse
brianp38dse
Keith_L
Disco 2 Can anyone tell me what this is?
Replies
9
Views
817
Stanleysteamer
Stanleysteamer
Back
Top