s3ndy
New Member
- Posts
- 59
- Location
- Manchester
Hi guys I have just installed an oil catch can to my 300tdi discovery to try and stop my intercooler filling up with oil!!
The setup I have used is:
-I ran the pipe from the crankcase straight into the oil catch can
-Blocked the hole in the turbo intake pipe that the crankcase pipe originally went to.
-Then I have put a filter on the other hole/exit of the oil catch can
Is this the correct installation?
The setup I have used is:
-I ran the pipe from the crankcase straight into the oil catch can
-Blocked the hole in the turbo intake pipe that the crankcase pipe originally went to.
-Then I have put a filter on the other hole/exit of the oil catch can
Is this the correct installation?