300TDI Cruise control failure

Hi Folks,

I have 'searched' this problem, and noticed the thread including the point about cable wear, I will investigate this.

However a friend who has a similar machine has mentioned that the 'fuse' blowing on these is a common problem ?

Is this correct, if so which fuse in the box(under the bonnet?) is it, so that I can check it?

Any other thoughts on this would be greatly appreciated.

My thanks in advance

JohnB

I've never had a fuse blow so not that common, but i've had split ends on the rubber vacuum pipe stopping it from working.

most times the problem is in the hoses as said. check the ends and if poss. cut back and push on.If you have to replace them use reinforced brake hose which will last forever.

cheers

jim Anderson
1996 300 Tdi auto(Jap reimport)