puting in a center td5 dash into a tdi

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

killnorton

New Member
Posts
105
Location
worksop
hi all looking for some help iv got a 200tdi and im fitting a td5 dash all has gone well till it came to the hazard swich i have got more wires on the td5 swich than on the tdi not noing wich is wich carnt find the wireing plan any where for this so if any one has got one or no where to find it pls let me no
 
hi all looking for some help iv got a 200tdi and im fitting a td5 dash all has gone well till it came to the hazard swich i have got more wires on the td5 swich than on the tdi not noing wich is wich carnt find the wireing plan any where for this so if any one has got one or no where to find it pls let me no

Do ye mean the whole dash or just the centre piece?
 
I'd just use a multimeter to find out which pins you need to connect too, or just a quick bit of trial and error, unless im missing something here?.. simples :)

Ollie
 
Sean do u no the eBay number
that rightup shows every thing but the td5 center console Wich houses the hazard warning light
 
The 16-Way and 20-Way Connectors needed for the TD5 Instrument Warning Lights are on eBay (see my signature).

As are the hazard warning lights switch connector, and the Black and Green 5-way switch connectors.

.
 
Last edited:
Those plugs are far cheaper elsewhere - RS for example.
But if someone is doing a complete cable to connect the Td5 dials to a Tdi loom then I'd like to see it, not sure it's possible though having read the description of the conversion and the way the instruments are powered/fed.

Malcolm
 
Those plugs are far cheaper elsewhere - RS for example.
But if someone is doing a complete cable to connect the Td5 dials to a Tdi loom then I'd like to see it, not sure it's possible though having read the description of the conversion and the way the instruments are powered/fed.

Malcolm

For most people, RS doesn't work out cheaper - especially for small quantities :confused:

To buy 1 x 16-Way Connector Shell, 1 x 20-Way Connector Shell and a Bag of 50 x Terminals (minimum order quantity)

Comes to £5.90 with VAT + £4.95* for P&P, total = £10.85

* unless you have an RS account, then you get free next day delivery :D


The same Connectors ordered from Simtek would cost you a total of £7.84 incl. P&P and VAT.

.
 
Last edited:
I picked them up from my nearest RS warehouse and avoided the delivery charge, although there was some confusion as to whether I should have been able to do that! Some items are only supposed to be available from the web site apparently in which case I would have gone to someone like Simtek. I detest having to pay a delivery charge that's almost the same as the price of the item.
 
I picked them up from my nearest RS warehouse and avoided the delivery charge, although there was some confusion as to whether I should have been able to do that! Some items are only supposed to be available from the web site apparently in which case I would have gone to someone like Simtek. I detest having to pay a delivery charge that's almost the same as the price of the item.

They sometimes make it feel like they're doing you a favour by serving you :confused:

I've given up with my nearest Trade Counter in East London and just have stuff delivered now.

It's location at Old Ford is a real pain in the arse to get to, involving the Blackwall Tunnel and (usually) long queues in both directions - wastes nearly the whole day to get there and back :mad:

Then, if they haven't got what you want in stock, it's another trip over there when it's in.

Thinking about it, £4.95 is a reasonable amount for P&P compared to a 40 mile round trip in a 4.0 V8 @ 15mpg :eek:

.
 
The only good thing about RS was that they didn't have one of the connectors but after the fuss I made in the place they rang round and got it sent to me post free - from France! It arrived 2 days later.
:hysterically_laughi
 
No don't think that's bad at all mate but the dash don't realy consern me right now it's just this one swich the hazards spent weeks looking got the epc nothing on there car dater disk nothing on there but without it I carnt get her back on the road
 
No don't think that's bad at all mate but the dash don't realy consern me right now it's just this one swich the hazards spent weeks looking got the epc nothing on there car dater disk nothing on there but without it I carnt get her back on the road


Have a look at my first post in this thread - all the info is there.

.
 
Back
Top