Gears crunching in reverse

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

lanny90

Member
Posts
65
Location
South Notts
Any advise plz changed slave cylinder, master cylinder, bled and no air in line also changed complete clutch, all forward gears ok but crunches into reverse, any help appreciated,:confused:
Cheers
 
If its only happening in reverse id be looking at the gearbox for the problem. Particularly the reverse gear.

what engine and gearbox is it? someone who knows alot more than me will be along shortly.
 
Try engaging a forward gear then go straight into reverse, if it goes in without a crunch it could mean several things, wrong grade of oil in box causing drag, idle speed too high, oil on clutch plate again causing drag.
hi tryed that as well still goes in with a crunch
 
Thanks for response , removed gearbox, refitted clutch, re bled system, and now seems ok, so some fault of ours but mindboggled us.:)
 
as rob said your clutch was dragging ,the reverse is a sliding idler gear on the lt77 and doesnt have baulk rings like r380 so clutch drag will cause symptoms as you had
 
Back
Top