| |
|
| Defender 90 / 110 / 130 Defender talk n tips. |
|
|
|
Welcome to Land Rover Zone!
You are currently viewing our site as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, photos and use our for sale section. Registration is fast, simple and absolutely free so please, join our community today!
|

6th-May-2008, 18:11
|
|
Member
|
|
Join Date: May 2008
Posts: 44
|
|
Can anyone identify this noise?...
Ok, I've ask this before I know but I'm not getting anywhere with my investigations...
At low speeds (up to 35mph) no noise at all. At faster speeds (35/40mph+) no noise on acceleration, no noise on braking, but when you coast with the throttle slightly depressed to maintain speed you have this clanking/grinding noise.
Foot on clutch, same noise until you start braking.
Someone suggested UJs - I got underneath and gave them a tug with the handbrake off and no movement other than a slight rotation with the prop.
I got a greasegun and went crazy on the nipples - they were a bit dry and I was hoping for a change in the noise, but on immediate test drive the exact same noise was there.
It sounds like its coming from the middle of the landy, but then noise travels, and short of hanging out of the open door on the dual carriageway I'm short on ideas apart from putting into the local garage for inspection and diagnosis.
Anyone, please, any suggestions??
I can take a digital recorder out with me, record the noise and post it here if anyone thinks it may help with the diagnosis?
Thanks in advance,
DC
|

6th-May-2008, 18:17
|
 |
Senior Member
|
|
Join Date: May 2005
Location: Harrogate or London
Posts: 22,489
|
|
Re: Can anyone identify this noise?...
have you checked all yer oil levels?
you could try taking the front prop and try driving with the diff lock on to try and narrow yer search down abit.
__________________
if you're in trouble, he will save the day
he's brave and he's fearless, come what may
without him the forum would go astray
well who's the guy? I hear you say
there's only one to do the job
its the one and only "Super-Slob"!
_____________________________
Its a far far better thing I do, that now requires me to find a hammer and pummel you with all due diligence.
|

6th-May-2008, 18:18
|
 |
Senior Member
|
|
Join Date: May 2005
Location: Harrogate or London
Posts: 22,489
|
|
Re: Can anyone identify this noise?...
oh and if yer uj's wur dry it will take some time fer the grease to work it way around every thing then yerd want to re grease em to ensure they is full
__________________
if you're in trouble, he will save the day
he's brave and he's fearless, come what may
without him the forum would go astray
well who's the guy? I hear you say
there's only one to do the job
its the one and only "Super-Slob"!
_____________________________
Its a far far better thing I do, that now requires me to find a hammer and pummel you with all due diligence.
|

6th-May-2008, 19:17
|
 |
A bit odd
|
|
Join Date: Nov 2007
Location: Losty, Kernow
Posts: 10,472
|
|
Re: Can anyone identify this noise?...
When my ujs were dodgy i changed the whole propshaft coz i was having the same noise under same symptoms on mine - the front UJs only had a tiny bit of play and there was also a tiny bit of play between the two halves of the propshaft (in the worn splines), but when i changed them it was like driving a new car, all noises, grinds, rattles, undue clunks completely gone! With the prop off the wear between the splines was a bit more evident but it really doesn't take much play in either to manifest itself as a dodgy noise!
__________________
Landrovers are really fun
There's one out there for everyone
You will get your thrills and spills
but the red ones, they don't go up hills
Landyzone - MANY LAUGHS, HAVE THEM!
Quote:
Originally Posted by Series71
oddys right !
|
|

6th-May-2008, 22:51
|
|
Member
|
|
Join Date: May 2008
Posts: 44
|
|
Re: Can anyone identify this noise?...
Ok, so it seems the general opinion is still the UJs as originally thought.
Will try regreasing the existing ones, and then change them if still no change.
Thanks for the help!
DC
|

6th-May-2008, 23:10
|
 |
YEEHAAAWWWW!
|
|
Join Date: Mar 2007
Location: Near Dumfries, Scotland
Posts: 11,343
|
|
Re: Can anyone identify this noise?...
Diff?
Only reason ah say this, is becaause ah've just changed the rear axle and now got a 'wump...wump...wump' noise on acceleration, but when ah take the foot of the throttle it's gone!!! Wheel bearin's are fine and so's the props and uj's. Bin told it might be summit tae do with a collapsable washer thingy that sets the preload in the doodah!
__________________
"Je Suis Prest"" I Am Ready"
|

7th-May-2008, 07:19
|
 |
A bit odd
|
|
Join Date: Nov 2007
Location: Losty, Kernow
Posts: 10,472
|
|
Re: Can anyone identify this noise?...
UH-oh, is it gonna be OK fer yer 600 mile journey on Fri Buster? At least you'll have a spare axle for most of the journey!! 
__________________
Landrovers are really fun
There's one out there for everyone
You will get your thrills and spills
but the red ones, they don't go up hills
Landyzone - MANY LAUGHS, HAVE THEM!
Quote:
Originally Posted by Series71
oddys right !
|
|

7th-May-2008, 08:23
|
|
Junior Member
|
|
Join Date: Mar 2008
Posts: 10
|
|
Re: Can anyone identify this noise?...
I had a similar problem with my 90, clunking coming from middle of the landy, but I was only getting it at low speeds and in reverse, and it just turned out to be the handbrake. One of the linings had come away from the shoe and when you would start driving it would catch on the drum, might be worth your while giving that a wee look.
|

7th-May-2008, 09:51
|
 |
Senior Member
|
|
Join Date: Sep 2007
Location: Warwickshire/Worcestershire
Posts: 613
|
|
Re: Can anyone identify this noise?...
Quote:
Originally Posted by darkcyde
Ok, I've ask this before I know but I'm not getting anywhere with my investigations...
At low speeds (up to 35mph) no noise at all. At faster speeds (35/40mph+) no noise on acceleration, no noise on braking, but when you coast with the throttle slightly depressed to maintain speed you have this clanking/grinding noise.
Foot on clutch, same noise until you start braking.
Someone suggested UJs - I got underneath and gave them a tug with the handbrake off and no movement other than a slight rotation with the prop.
I got a greasegun and went crazy on the nipples - they were a bit dry and I was hoping for a change in the noise, but on immediate test drive the exact same noise was there.
It sounds like its coming from the middle of the landy, but then noise travels, and short of hanging out of the open door on the dual carriageway I'm short on ideas apart from putting into the local garage for inspection and diagnosis.
Anyone, please, any suggestions??
I can take a digital recorder out with me, record the noise and post it here if anyone thinks it may help with the diagnosis?
Thanks in advance,
DC
|
Dude ive got the exact same thing but on my LDV flatbed van.
No noise on acceleration or deceleration. But when you press the throttle enough to maintain speed it make a right nasty noise.
I havnt got a clue what it is, but one of the guys here used to be a mechanic. Ill ask him about it and let you know if I find out.
__________________
HuN73R
(Only Boring People get Bored!)
Quote:
Originally Posted by odenne
do wot Hunter says!
|
Quote:
Originally Posted by SuperPete
I cuncur wiv HuN73R
|
Quote:
Originally Posted by slob
nothing gets reet on me nipple ends more than having to agree with someone but is this case am gonna have to!
|
|

17th-May-2008, 15:19
|
|
Member
|
|
Join Date: May 2008
Posts: 44
|
|
Re: Can anyone identify this noise?...SOLVED!
Ok, finally picked up some new UJs from my local Bearmach - changed the rear's and the noise is gone completely - really smooth ride now too so I'm well chuffed!!
Also, had my local Land Rover specialist have a quick look over and he feels I've picked up a good deal with the price I paid, and the rust problems are easily sorted with a bit of welding and patching, so I'm full speed ahead with my little project now! ;-)))
Thanks for all your help guys!
DC
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 14:11.
Content Relevant URLs by vBSEO 3.2.0
|
|
|
|