Transfer box

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

mathewpink

New Member
Posts
141
Location
stockton on tees
Hi it would apear i have an od transfer box amongsed the boxes i have. After looking at the parts mannual it looks to be out off and series 2 A suffick B gear box.
Can any one tell me the ratios off these transfer boxes or what they were fitted to?
 
Rite after research it would appear what i have is a larage intermiediate gear in the transfer box but with the same amount of teeth as a very early series 1 box. So it is has a lower ratio than a series 3 transfer box with the big pin but not as low as a 1ton.

I looked in my mannuals etc they did make them but the are exteramly rare :)
 
yes your right suffix b does have big pin and different ratio i thought there were only higher with big pin ,but earlier and presumably suffix b ,high was 1.148 to 1 and low 2.888 to 1
 
Back
Top