Is this bulkhead repairable?

Webley1991 · Sep 6, 2014

EDIT: THIS HAS NOW BEEN SCRAPPED.

This is the old bulkhead that I removed when I stripped my S3 down.

As you can see, it has a lot of rot.

It is the early type with the transmission tunnel spot welded to the centre section.

In your opinions, Is this repairable?

If not, I will take it to the local tip.

Thanks
webley1991

samc88 · Sep 6, 2014

Yes, footwells can be done easily. Hardest bit is the vents, but then you can find another bulkhead with better condition vents and swap them. Have a look at Johnny curts rebuild thread, he repaired all that section himself

It is a lot of rust but it must be worth a go

samc88 · Sep 7, 2014

Its a good practice project for anyone fancying welding

Gunscrossed · Sep 17, 2014

Where in London are you?

series 3 sweet 16 · Sep 18, 2014

Webley1991 said:
This is the old bulkhead that I removed when I stripped my S3 down.

As you can see, it has a lot of rot.

It is the early type with the transmission tunnel spot welded to the centre section.

In your opinions, Is this repairable? If anyone is interested, send a PM.

If not, I will take it to the local tip.

Thanks
webley1991

What's the pillars like? Could do with some to rebuild mine as pillars are shot? Ta

Is this bulkhead repairable?

Webley1991

Well-Known Member

Attachments

samc88

Drivels spiritual representative

samc88

Drivels spiritual representative

Gunscrossed

Active Member

series 3 sweet 16

Active Member

Similar threads