Non starter help

Hi all recently my flex plate broke on my 300 tdi auto so I have replaced that and went to start but there is no fuel what so ever at the injectors. I have tested the stop solenoid and taken the plunger out there is fuel getting up to that but dosent seem to be getting any further. When I switch the ignition on the check engine light comes on to heat the glow plugs then off and then straight back on so the problem must be electrical. Can anyone th ink of any other resons why I have this problem.

Have you damaged the crankshaft position sensor whilst doing the flex plate, if the ecu cant see the cps signal it wont inject any fuel.



Lynall

Thats what i thought at first but think i have found the problem now a blocked injection pump but ty for you advice.

How did you block the fip?



Lynall