para7
New Member
- Posts
- 57
- Location
- Wrexham N.wales
Guys popped out to start the disco 2 tonight after standing for. 2 weeks and noticed the rear suspension really low compared to the front,any suggestions I am thinking air suspension issues
Rear suspension
- Thread starter para7
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Optimus Prime
Well-Known Member
- Posts
- 5,988
- Location
- Garden of England
Guys popped out to start the disco 2 tonight after standing for. 2 weeks and noticed the rear suspension really low compared to the front,any suggestions I am thinking air suspension issues
ooh, as if by magic you answered your own question.
need to check rear suspension air bags, valves/connection point on same, pipework feeding same, valves/connection point to valve block then valve block itself it that yields no results.
unlikely to be compressor or line from compressor to valve block as only affecting rear units.
good luck
biggeeeee
Retired - Living the dream
- Posts
- 11,090
- Location
- Lanarkshire or Argyll
Disco only has air to the rear, you must have a leak
L90 BCM
Active Member
- Posts
- 328
- Location
- War-wick-Shire land
Yep d2 only has air bags on the rear and I would say if it's gone down together ie not just one side, then the bags are could be ok and it could be a seal or some other component. Normally when the bag has gone that side sits down
para7
New Member
- Posts
- 57
- Location
- Wrexham N.wales
Thanks guys i will investigate in the morning and let you know the outcome
para7
New Member
- Posts
- 57
- Location
- Wrexham N.wales
Well following on from my earlier thread regarding the disco 2 rear air suspension, I am confident that I have no leaks as both airbags have dropped at the same time and I have checked all the lines.
I have checked the relays and fuses and removed the compressor cover and it does not seem to be doing anything so I am convinced its a faulty compressor/ valve block,thank you for the advice
I have checked the relays and fuses and removed the compressor cover and it does not seem to be doing anything so I am convinced its a faulty compressor/ valve block,thank you for the advice
para7
New Member
- Posts
- 57
- Location
- Wrexham N.wales
Well guys,had a few days off from work so decided to strip the rear bags of the suspension and low and behold they were full of water,no wonder they were not working.I am now fitting springs and hopefully get back on the road.
