Help needed please

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

huddy229

New Member
Posts
261
Hi everyone,

I fit a small digi thermometer today in the gap in front of the courtesy light, I fed the wire out towards the window screen inside the roof lining, across to the left, and popped the sensor out under the rubber door seal. Now, when I unlock my disco, no lights turn on automatically? But they come on when I change it to automatic? Can anyone shed some light, could I have disturbed a sensor somewhere?

Thanks guys,
 
Hi everyone,

I fit a small digi thermometer today in the gap in front of the courtesy light, I fed the wire out towards the window screen inside the roof lining, across to the left, and popped the sensor out under the rubber door seal. Now, when I unlock my disco, no lights turn on automatically? But they come on when I change it to automatic? Can anyone shed some light, could I have disturbed a sensor somewhere?

Thanks guys,

check the door pin (plastic spring loaded button) in the door shut.
 
Sorry lads, biggeeeee is correct disco II I had to cut the headlining behind the plastic trim to push the wire through, is there anything up there I could of cut?
 
Hi everyone,

I fit a small digi thermometer today in the gap in front of the courtesy light, I fed the wire out towards the window screen inside the roof lining, across to the left, and popped the sensor out under the rubber door seal. Now, when I unlock my disco, no lights turn on automatically? But they come on when I change it to automatic? Can anyone shed some light, could I have disturbed a sensor somewhere?

Thanks guys,

If you have the LCD climate control fitted to you Disco instead of the round dials for your heater, then you already have an outside air temp reading.
On the right below the display there is can button marked EXT, press this and the tempmis displayed.
 
Back
Top