Remove Drivers door panel

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
G

GaryWilliams2014

Member
Posts
20
Hi All,

My drivers door panel is no longer snugly fitting to the inside of the door. I want to remove the panel to repair/replace any of the fittings that snap the door card firmly against the metalwork of the door itself.

How do I do this without firing off the SRS device?

Cheers

Gary
 
GaryWilliams2014 said:
Hi All,

My drivers door panel is no longer snugly fitting to the inside of the door. I want to remove the panel to repair/replace any of the fittings that snap the door card firmly against the metalwork of the door itself.

How do I do this without firing off the SRS device?

Cheers

Gary
Click to expand...

Removing door card should not deploy airbag. But if you want to be safe disconnect battery and wait twenty mins or so before you start work.
 
GaryWilliams2014 said:
Hi Wammers,

Would it be sufficient to just pull the SRS fuses before I start unsnapping the plastic fixings?

Cheers

Gary
Click to expand...

I removed the passenger door card from the lads L322 when his door lock failed without disconnecting battery. Can't quite remember the layout but as long as you are careful all should be fine don't unplug the SRS.
 
You must log in or register to reply here.

Similar threads

F
Freelander 2 (LR2) Drivers door bent back the wrong way
Replies
9
Views
769
Nodge68
Nodge68
Pillar
Disco 3 (LR3) Discovery 3 / 4 Rear Door Actuator Replacement [When door won't open].
Replies
2
Views
736
Pillar
Pillar
nevillen
Rdeplacement Front Passenger Door
Replies
0
Views
569
nevillen
nevillen
G
drivers door inner handle stopped working
Replies
17
Views
2K
GerryN
G
hk_cat
P38A Rear Drivers Door Removal
Replies
7
Views
1K
modelman
M
Back
Top