Powerbox connection

Can anyone help?

Just bought a secondhand PSI Powerbox and it has 2 no connections the round plug is obvious but it has a pipe with a t piece and i've no instructions and i cant get hold of the guy i got it from to ask where it connects to .

It's for P38 DSE the first type they made 1995-1999 i think because mines a 1997 and it came of a 1996 one, so it is the correct one for my rangie

The T piece goes in the pipe from the manifold absolute pressure sensor. The pipe comes from the underside of the inlet manifold at the rear and goes to the sensor mounted on the fuel filter.

Cheers Datatek, is this pipe black in colour and looks like a braided cloth hose

DM68 said:

Cheers Datatek, is this pipe black in colour and looks like a braided cloth hose

Click to expand...

yes mate thats the one.

Cheers for that,i'll fit it tomorrow and see if their as good as everyone says.

Looking forward to the results after i fit it.

DM68 said:

Cheers for that,i'll fit it tomorrow and see if their as good as everyone says.

Looking forward to the results after i fit it.

Click to expand...

has your power box got a small hole on the side of it,if yes dont worry about it,it just checks the atmospheric air pressure thats all. YOU WILL notice a big difference in your rangy,i know i did and was very pleased as my fuel consumption dropped,not a lot but any saving is good on a p38.

Have just installed it and went for a quick spin.Its definately better than standard and gives it a bit more get up and go from the off.Pulls alot better from stand still and the kickdown whilst overtaking is alot better,so all in all result.
Thanks for everyone input.

Thanks for letting us know.