left door electrical problem p38

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
As said most likelydoor switch.

remove, clean with wd40, push in and release a few times to work in wd40 then replace. If you short the single wire out to door frame the light should come on, if not it may be a loom problem.

Let us know how you get on

Fred
 
hi fred ..
i think i have a serious prob. in here .coz even the switch of the cruise control doesn't lit on anymore and another switch too ...
maybe saturday i will have time to find out what is happening in my rangie ..
thanks anyway
charbel
 
hi fred ..
i think i have a serious prob. in here .coz even the switch of the cruise control doesn't lit on anymore and another switch too ...
maybe saturday i will have time to find out what is happening in my rangie ..
thanks anyway
charbel

The cruise control button and the other switch is most likely just the bulbs that light the switches. Does the cruise control still work???

-Wills :)
 
the photo road turns on , but when i acctivate it , the orange light doesn't go on ...
any idea plz ?

Just the orange light not coming on?? The cruise control is still working though right?? As in, you press the SET button and it holds speed??

Its most likely just the bulb in the cruise control button, you just need to replace it with a new one - see...

Fascia Switch Pack

-Wills :)
 
Just the orange light not coming on?? The cruise control is still working though right?? As in, you press the SET button and it holds speed??

Its most likely just the bulb in the cruise control button, you just need to replace it with a new one - see...

Fascia Switch Pack

-Wills :)
yes the cruise control is still working right and it holds speed ...
yes , i think it's the bulb ..
thanks anyway wills ..you were very helpful , as always ..
 
Back
Top