p38on22s
New Member
- Posts
- 324
- Location
- uk--- clacton on sea
as i did a previous thread my bonnet wouldnt open and people was saying its a bastard of a job and had to lay underneath it, well i found a way to do it which only takes a few minsand doesnt invole laying underneath or shreading hands or arms anywhere
1st undo the screws in the bottom of the front grill that will pull out far enough to get your hand in to feel where the cable goes to then if you get a straight rod and make a hook on it you can put it thru where the cable runs and feel it catch the release and with that one pull and it opens i tried this on the bonnet release on both sides and works well only takes a few mins, hope it helps you guys out if you ever need it saves laying underneath
1st undo the screws in the bottom of the front grill that will pull out far enough to get your hand in to feel where the cable goes to then if you get a straight rod and make a hook on it you can put it thru where the cable runs and feel it catch the release and with that one pull and it opens i tried this on the bonnet release on both sides and works well only takes a few mins, hope it helps you guys out if you ever need it saves laying underneath
