Help with taking out a Radio to get Serial number

I've a 1998 2.5 DSE which I've had for 2 years. Its been great except the battery died and I cant find the code. I had this problem before and had to give Landrover the Vehicle Number but also the serial number of the radio.

Just need to figure how to get the radio out to get the serial number off the back :-(

I took the faceplate off and tried to pull. There were 2 screws to the left and right which I removed. Is there a special tool to use or something?

or would anyone know a quicker way to get the code. I dont know what model. Its a factory fitted one as it says Landrover on it and had RDS Diversity

It looks like this one
www.carstereohelp.com/images/LandRoverStr03170301.jpg

Thanks in advance
Alan

Actually got the radio out. for anyone who is stuck there is a great tutorial at radiolcd

Would anyone know the code to unlock a PU 9836A

Thanks

hi alan there are 2 holes where a tool goes in to realease the clips that secure the radio , but its possible to release the radio without the tool using a couple of thin screwdrivers or similar , its a little more awkward but not as bad as some .
rick.

sorry i was a bit late there mate try this site for help with your code i found them great when i had problems with my lexus .
Landrover Radio Codes - Online radio Decoding and FREE Code Entry Instructions for Landrover

hope it helps rick.

Thanks Rick. Just seeing if I cant it for free.

I found a bin file which I guess is to be used with some software but no idea how to read it.

Thanks