EAS Big spend!

I must be nuts!! But Ive just put together an order for all of the EAS system parts to reconvert my P38 from Springs back to air...! If I can bring myself to click commit to purchase will it be as simple as 1,2,3 to remove springs and fit the EAS system. Ive removed the whole lot so it'll be a mostly new system on the car from pipes to compressor. Is it just plug and play or will I need a Nanocom to get it working once fitted?


W

You will need to calibrate the heights either with Nanocom or the EAS software, othrwise should be plug n play unless any of the wiring has been tampered with.

Well done mate, you won't regret it. Good luck.

The wiring is all still there. I've taken everything else out and will replace it with new or working second hand so to try and avoid the problems others have.

Littelwill said:

The wiring is all still there. I've taken everything else out and will replace it with new or working second hand so to try and avoid the problems others have.

Click to expand...

Good luck with it

We are just a click away Will.

Datatek said:

You will need to calibrate the heights either with Nanocom or the EAS software, othrwise should be plug n play unless any of the wiring has been tampered with.

Click to expand...

As a little aside. How do you calibrate the height using EAS software? I have only ever used it to diagnose faults.

Im hoping to get it all back on air ASAP and if its going to be as simple as fitting it and getting a lead to set it up it cant be that hard right.... Then after the respray I'll have to sell it pretty quick before it all goes wrong lol

Good luck with the swop over and well done in takeing the plunge.

Cheers Brian

Good luck dude as much as id like mine back on air im not as brave as you. Or have a computer to hand. Plus id have trashed at least two bags around the farm

Rob Edge said:

As a little aside. How do you calibrate the height using EAS software? I have only ever used it to diagnose faults.

Click to expand...

Have a listen: https://www.youtube.com/watch?v=h0G1Ucw5HDg
and think about it

I'm totally new to this side of the p38 so please be nice... What is an EAS kicker?

Littelwill said:

I'm totally new to this side of the p38 so please be nice... What is an EAS kicker?

Click to expand...

Bend over.

Alan I swear we've been over this... Buy me dinner first!

Littelwill said:

Alan I swear we've been over this... Buy me dinner first!

Click to expand...

Your too rich for my taste. I've told you before, we go Dutch or nothing doing

Littelwill said:

I'm totally new to this side of the p38 so please be nice... What is an EAS kicker?

Click to expand...

Blackbox Solutions tool to read EAS faults. Don't bother, just save a bit more and get a Nanocom.

Grrrrrr said:

Blackbox Solutions tool to read EAS faults. Don't bother, just save a bit more and get a Nanocom.

Click to expand...

+1, the EAS software is cheaper and better.

Nanocom seems the way forward :/ pricey!

Littelwill said:

Nanocom seems the way forward :/ pricey!

Click to expand...

There's always the laptop + Datatek cable and Storey Wilson's software. £20-ish if you already have a laptop.