View Single Post
  #1  
Old 4th-July-2008, 07:21
Costellon Costellon is offline
Junior Member
 
Join Date: Jul 2008
Posts: 2
Default Front wiper problem

Hi all, this is my first post so please be patient !
Recently purchased a 1994 disco 300tdi, did a load of work- fixed central locking, sorted lighting problems, de-seized locks, replaced fan belt and tensioner, fixed hoses for power steering, replaced universal joints, swivel housing and seals etc....no major hassle in rectifying these things- but the front wiper motor was burnt out and got a second hander, tested it- fine- and on installation, I noticed that the wiring from the motor to the footwell was also burnt out (not all, just some). Cut out dodgy wiring and ran new wires- replaced fuse- I suspect that the relay was also fried so I got another (ie- no power to the motor- front only- rear works fine as do the washers both front and rear). Can't locate the original wiper relay- please help and just to be sure that I have the right replacement one- how many terminals should it have ? Any other input or suggestions ? Anything appreciated.

Thanks.

Last edited by Costellon : 4th-July-2008 at 10:47.
Reply With Quote

Hey Guest!

Not Registered? Join today!

Registration allows you to
post on our forums,
host photos in our gallery
and place adverts in our classifieds.

 
Page generated in 0.12930 seconds with 9 queries