View Single Post
  #3  
Old 27th-May-2008, 21:30
Tinribs's Avatar
Tinribs Tinribs is offline
Senior Member
 
Join Date: Jan 2007
Posts: 524
Default Re: Project Series 2A

This lot of work was done back at the may day bank holiday. Went out and got myself a new cheap parts washer and set about dismantling the gearbox. The hand brake was full of shitty oil thanks to the knacker seal. Oil in the transfer box was contaminated with water- no suprise there! It all came apart easily enough and there were no obvious major problems with the expensive bits inside, just some rumble in the worn bearings. Parts washer worked a treat.
Attached Thumbnails
project-series-2a-1.jpg  project-series-2a-2.jpg  project-series-2a-3.jpg  project-series-2a-4.jpg  project-series-2a-5.jpg  

project-series-2a-6.jpg  project-series-2a-7.jpg  project-series-2a-8.jpg  project-series-2a-9.jpg  project-series-2a-10.jpg  

__________________
"When non-enforcable encouragement was made for such aforementioned non gender specific individual to cleanse his nether parts, hithertoaforementioned non gender specific individual returned with shit (this is anything goes) upon the physiognomy" - nonmetalspecificmidriffbone pertaining to the likeness of a non-identifiable generic "acquaintance"

"If you told him to wipe his poochute he would come back with poopoo on his face....." Tinribs referring to a work "friend".
Reply With Quote
 
Page generated in 0.12561 seconds with 10 queries