Latest activity

As per @woodO's post. on the bolt still in place on yours lower down.

Absolutely bang on with the AC pressure sensor there! It looks like some wiring from the ECU was rubbing against it and then its broken. It's snapped right at the connector so will have to try and re pin it. Thanks for that! I ordered those o...

The PTU oil is due to be changed again soon because the first change which i did in November 2023 was to me a flushing change, also my intention is this time round i will drill and tap a drain hole plug. I have gathered the drill bits, taps, and...

I take it you've met that nice lady down our street then :rolleyes: ;)

Tharts what she said🤭

Exactly!

I take it you have already measured your balls? If they are the same size as a full size or a 12 foot tabul you'll need pockets the same size. I've played on full size, half size and other smaller tables. But never really thought about measuring...

That's a good question all I can tell you is they're dark coloured I'll endeavour to look & take pictures tomorrow.

It's not just her that likes driving it. It is a practical and fun car which is also fairly economical, avg 36 mpg.

Hi, Only one new injector cost 300 £, you still need to add the labor.

There are various combos of what we could do and we have given a lot of them thought. Buying a Frog car would be one, although we have no garage. Buying an estate and towing a smaller ornery trailer would be another. We still have to transport...

Once upon a time I would have got a response in seconds :D :D Oh those were the days

My Rangie Handbook says max 3,500Kg with braked trailer, and with a maximum nose weight of 150Kg.

Now there's an opening for a comment 🤭

According to that list, I'd have had to have had a small lorry to tow some of the stuff I have towed with the Discos! I purposely bought them as they had a towing weight of 3.5 tonnes. So I don't know where Gary White is getting all this from.

Oh dear now you have gone and upset, @Hippo, did you forget yoursen?

Thanks for this. although I'm not in the market for one at the mo! on replaceable brushes, looks like real poop to me, but then I keep everything forever. My ex s-i-l STILL cannot believe that I am still using his discarded Dewalt drill. But...

An fule economery anorl.

I'm having trouble with a garage who replaced all 4 injectors with what they claim are new. The engine revs once then goes into limp-mode with the new injectors. I suspect the garage may have got them from a scrapped vehicle. I'll add the...

You’re a couple of hours away from me then, no problem. What colour are the seats?

Hi been a while now did you get the diff sorted out please let us know.

I know almost nothing about the D sport but there shoud be a simple trick to disable the volumetric alarm for example on the D2 it's disabed when the vehicle is locked with the key instead of fob, those sensors used to suffer from corrosion if it...

Along as your happy with.

Av gorra go. Eye hassa nooker table to make. Eye has redesigned me finking on the corners into the pockets. Size was a concern. Eye were making em too small by not taking into account the custion strip. Eye wanted to make em a bit smaller to...

Thanks Kermit ..... the battery is fully charged up at 12.7v ....and the Range has a new starter motor. The points are a bits used but I have seen worse.

Hi thanks for reading this post. My original vacuum pump has stop working. I have take the hose off at the vacuum pump and there is little to no pressure or suck even revving the engine. So as ever I googled for a replacement part/pump and on...

Thanks, I will check it out 🤞

Lift rods work ok but limit how much extended off road height is available as you have already used 50mm of the available travel. Same result can be achieved using a gap tool to increase the suspension either permanently or as and when it’s...

Mornin Sunshine and cold No motivation this mornin Stay focused all :)

Was looking at the web for me sand paper. Lot of em on screwfix and toolstation delivery only. Bnq simular. Went to bnq and din't have me sanding belts in the size eye need. Not much selection. Somefink eye has noticed across all the hardware...