lj5000
Member
- Posts
- 54
- Location
- Nottingham, UK
2010 RRS 3.0 TDV6 - Auto
I have recently had an issue which I posted about on here, where the offshoot pipe on the bottom on the passenger side air intake pipe have snapped off, causing a restricted performance and a high pitched whistling noise. I fixed this and the car has been running fine up until now.
Whilst out driving today, I got another restricted performance, a check engine light and the power available to me was much less than last time, I struggled to drive up the hill I live on, was crawling at less than 10mph.
After some investigation, the problem I fixed before seems to be absolutely fine. I have another noise, which is similar, when I lift off the throttle. It's a cross between a high pitched whistle and a bird chirping.
I have tried to locate it and it seems to be coming from the air intake system, after taking it apart I have a significant amount on oil in the pipes, as well as in the MAF sensors and my air filter is covered in it too.
I am going to try and get my friend with a code reader round but he isn't available today.
Has anyone got any ideas? I have looked on forums but found nothing that stood out as the same problem.
I have recently had an issue which I posted about on here, where the offshoot pipe on the bottom on the passenger side air intake pipe have snapped off, causing a restricted performance and a high pitched whistling noise. I fixed this and the car has been running fine up until now.
Whilst out driving today, I got another restricted performance, a check engine light and the power available to me was much less than last time, I struggled to drive up the hill I live on, was crawling at less than 10mph.
After some investigation, the problem I fixed before seems to be absolutely fine. I have another noise, which is similar, when I lift off the throttle. It's a cross between a high pitched whistle and a bird chirping.
I have tried to locate it and it seems to be coming from the air intake system, after taking it apart I have a significant amount on oil in the pipes, as well as in the MAF sensors and my air filter is covered in it too.
I am going to try and get my friend with a code reader round but he isn't available today.
Has anyone got any ideas? I have looked on forums but found nothing that stood out as the same problem.