Rear window programing

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
hand book says same as the mans post but dont work , i found the procedure before but cant find it again ?
No idea to what man you're referring too?

The windows will need to be reset if the battery
is disconnected, becomes discharged, or
power supply is interrupted.

Reset as follows :-
1. Close the window fully.
2. Release the switch, then lift it to the close
position and hold for two seconds.
3. Open the window fully.
4. Release the switch, then push it to the
open position and hold for two seconds.
5. Lift and release the switch to operate the
one touch function.
6. Repeat the procedure on each window.
 
No that don't work. What I mean is when you open the rear windows you have to push the button twice to get it to fully open or it only opens 2 inches
Sounds like the windows are stiff, which is activating the anti-trap function.
If you gently help the window go down, does it go all the way down with just 1 push?
 
Back
Top