P38 top end stripped lpg advise

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
T

thegasman

Member
Posts
56
Location
ipswich suffolk
Hello all just stripped top of my p38 and it already had lpg fitted which hasn't worked for years just wondering if I should get a good second one or leave in it on petrol and resolder injectors back to how they should be or buy a new lpg front end kit
Just I can't make my mind up not too bothered about fuel consumption at mo but just wondering other people's input
And if I do get convinced of Lpg am looking for one if anyone knows of of a source
Thanks for any input
Nick
 
Depends if you have LPG available near you, and if you want to use it.

My project P38 has LPG, so I re-installed everything, but have only run it on petrol so far. Put the injectors & wiring in, so I didn't have to block the manifold ports. Local specialist said when I'm ready to get it tested, to put £10-15 in and they can do a full check. Verbal quote was about £120 which I though was reasonable. He also said get the LPG at ASDA in Wycombe as it's the cheapest & avoids ULEZ trip !! Must admit I havent bothered yet, because I rarely pass anywhere with LPG available.
 
pwood999 said:
Depends if you have LPG available near you, and if you want to use it.

My project P38 has LPG, so I re-installed everything, but have only run it on petrol so far. Put the injectors & wiring in, so I didn't have to block the manifold ports. Local specialist said when I'm ready to get it tested, to put £10-15 in and they can do a full check. Verbal quote was about £120 which I though was reasonable. He also said get the LPG at ASDA in Wycombe as it's the cheapest & avoids ULEZ trip !! Must admit I havent bothered yet, because I rarely pass anywhere with LPG available.
Click to expand...
Lpg mile away if I fitted would use I guess on a run
What make did you fit
 
It was in the car when I bought it. Prins multi-point system. Apart from re-installing after the engine rebuild, the only thing I have do is improve the coolant pipe run layouts where they tee off to the vaporiser.

1713385748697.png
 
Prinns is what's my thinking was to fit it was a good system last time I thought of getting a new kit but it's been a while and want to see if it best value for money reliable
And worth the cost
 
You must log in or register to reply here.

Similar threads

ukadamwest
P38A Farewell to another P38.. or hello ?
Replies
18
Views
927
Grrrrrr
Grrrrrr
T
P38 V8 performance probs and subsequent fire
Replies
4
Views
382
Henry_b
Henry_b
J
Another P38 2.5DSE 4th injector Question
2
Replies
28
Views
1K
JT_spark
J
Spong
Any Suzuki Jimny owners here...?
Replies
2
Views
839
300bhp/ton
300bhp/ton
jimmacD
Back to the P38 house of pain!
2
Replies
21
Views
1K
Grrrrrr
Grrrrrr
Back
Top