My god it rattles

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

MentalFrix

New Member
Posts
22
Location
Hertfordshire
But what are they?

Have tried various settings, freewheel hubs locked and unlocked, 4wd on and off, High/Low etc

The clutch seems to stick a bit after it has been warmed up and sat for a few minutes (petrol station, shop etc)

The front half-shafts seem a bit rattly and the transmission braking is phenomenal. Is this normal?

It is a 1960 Series 2. I love it already:)
 
Bleed the clutch, see if it stops it sticking. Make sure there's oil and grease where there should be - there's a lot of places it needs to go. Go through the whole transmission chain, looking for free play or stiffness. Check the brakes aren't binding. Report back.
 
****ant said:
The overdrive lever on mine rattles away to itself, doing my head in, anyone got any idea,s ?:confused:
Dave
Click to expand...

i pulled the pivot bolt out of mine and fitted a thin O ring on it up to the hex head, i then squirted chain lube inside the pivot and over the pivot bolt, it hasn't rattled since...

i drop a heavy rag over my high/low lever to stop that rattling ...

all i've got to do now is get round to reattaching the radiator surround to the crossmember fixings to stop the bonnet and wings from clattering when i'm sat at the lights (bottom of the surround has rotted off :D )
 
You must log in or register to reply here.

Similar threads

N
Wheel resistance
2
Replies
39
Views
2K
steve2286w
steve2286w
juliethotel
L322 TD6 gearbox issue
2
Replies
21
Views
3K
juliethotel
juliethotel
ryan_1993
Understanding a few 1990s Land Rover Trim/Options for the CSW (Research)
Replies
11
Views
1K
Stevetheplant
S
CohPC
4 months of owning 1974 series 3
Replies
4
Views
1K
CohPC
CohPC
P
Fault finding Autobox Freelander 1 (V6)
2
Replies
20
Views
2K
felborba
felborba
Back
Top