Landycruiser007
New Member
- Posts
- 2
Advice on changing mass air flow sensor on freelander 2006 please
Mass air flow sensor
- Thread starter Landycruiser007
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
rhodie
Active Member
- Posts
- 722
- Location
- hemel hempstead herts
remove and replace :mooning:
Singvogel
Well-Known Member
- Posts
- 2,971
Hi and welcome to LandyZone,
You'll quickly realise that there is a lot of ****-taking on here - but......
If you give us a bit more info as to why you're changing it - or what it is that is proving difficult .......we should be able to help.
Physically you need to remove the air-filter cover - a long allan-key will simplify the job. Then you need a security torx bit to remove 2 holding screws.
Can I assume you've searched and read a bit about the MAF on a Freelander?
Cheers,
Singvogel.
You'll quickly realise that there is a lot of ****-taking on here - but......
If you give us a bit more info as to why you're changing it - or what it is that is proving difficult .......we should be able to help.
Physically you need to remove the air-filter cover - a long allan-key will simplify the job. Then you need a security torx bit to remove 2 holding screws.
Can I assume you've searched and read a bit about the MAF on a Freelander?
Cheers,
Singvogel.
rhodie
Active Member
- Posts
- 722
- Location
- hemel hempstead herts
whos **** taking
Similar threads
Freelander 2 (LR2)
Limp mode