Nodge68
Well-Known Member
- Posts
- 32,504
- Location
- Near Newquay
It's actually an 8mm spanner size, but rust makes the head smaller.
I've had to use an air chisel to cut them off before now, as they seize up solid.
Freelander 1 Just when you thought.......
- Thread starter Alex1000
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
It's actually an 8mm spanner size, but rust makes the head smaller.
I've had to use an air chisel to cut them off before now, as they seize up solid.
Alex1000
Active Member
- Posts
- 203
- Location
- Northern Ireland
Hard to get at to cut, but I'll do what I have to...thanks for the info...
Nodge68
Well-Known Member
- Posts
- 32,504
- Location
- Near Newquay
They are, which is where an air chisel comes in handy.
Alex1000
Active Member
- Posts
- 203
- Location
- Northern Ireland
I usually find a 2lb hammer works. If not I've a 4lb. Sadly no air chisel.
