Yes I have lift, I have had a look at it. The only thing that’s wrong is the seals so no need to upgrade or change anything. It’s all tight no play in anything. So can just drop the transfer box out the bottom like you said
No. I’m sure it’s not that hard, was just wondering if anyone else has done it. I would assume it’s props off, disconnect the breather and cable running to the transfer box gear stick, then undo the bolts that hold it to the chassis
Morning all,
Looking to remove my transfer box off my Td5 90 to do the seals and have a leak. I can’t seem anything anywhere online on how to take it off just to get me going in the right direction. Was just wondering if any of you have taken...
Hi all,
I have an early 2001, so Y reg, defender TD5. Does anyone know if it has the cat or not because I know for definite on the 51 reg defenders they did.
Thanks,
Sam
Hi all,
When I put my defender into reverse today I started to hear a knocking sound coming from the transfer box/handbrake drum. I took the middle inspection panel out and when I was reversing and looking at the transfer box the handbrake drum...
I have ordered a swivel rebuild kit and new hub just incase the hub is warn then I’ll also rebuild the swivel to make sure the bearings haven’t collapsed
Hi all have replaced the wheel bearing and done the 2 nut method but I still have up and down moment when you grab the top and bottom of the wheel compared to the other side where there is no movement at all
Hi all,
Just bought a Britpart chubby box to replace my middle seat. How have people mounted them as they don’t come with any fixings or any suggestions. So some light on how people have mounted them would be great.
Thanks, Sam
Ok I would assume because one of the spacers is missing the bearings will have space on the shaft to move, in my bearing kit I have got another nut like one for a 200tdi. Can I still use the Td5 nut, so do the 200tdi nut then washer then Td5 nut...
Hi all,
I have just replaced one of my front wheel bearing, put it all back together and there still seems to be some play when you grab the bottom of the wheel and push it back and forth. Anyone got any ideas what that could be?
Just gone to...