I took off my overdrive today can anyone tell me if this looks worn ? I have no diagrams as to what this should look like but my overdrive is squealing Thankyou Nick
Wonder can anyone help here I removed the farey overdive today and I enclose a picture ( it is dramatically magnified ) of a shard of metal found inside the hole of the overdrive as pictured below its difficult to see inside the hole where the...
Hi all I am Trying to remove the farey overdrive for a service this may sound stupid but the bolt on the overdive lever ( does it turn clock wise or anti clockwise this bolt will not budge ) tried a snap on breaker bar still wint move ? I did...
I have 2 buckets under mine at the moment I know now it's only under pressure is when it leaks oil so I am presuming crank seal ( I do know the oil filter case is leaking but that was my fault ) your all obviously aware but there is a UV...
I didn't check the earth's properly only for tightness but I can say no screeches or squeals ? No sound of a slippage type ( missing teeth on the flywheel ) the earth strap from the starter to the chassis is a bare woven mesh type cable which...
I know sweated it all the way no AA or RAC recovery hell of a risk took some basic tools but she made it as regards the tools etc I am sure there are some guys on here been through the same thing my motto now is Wife is replaceable but vehicles...
Yes I am beginning to see that .I have owned VW buses including a 65 VW splitscreen but the ex got it through the divorce along with a great selection of Snap on tools for the lucky new guy lol but I read the landrover can't be used daily I...
Sorry to trouble you again what do I have to remove to get access to fit the wading plug I am presuming propshaft etc ? Thanks again Just to also add I have a slow starter sometimes it's quick then it's slow ? I pulled the starter apart it has 4...
Thanks Steve that's really useful firstly no I didn't drive far with it on I will ask my Mrs to take a picture of the overdive top and you will see the silicone ( white dot someone has put there ) do you know where I can get the wading plug from...
Thanks guys I am slightly confused with the plug on the housing .The filter I replaced has a long bolt running through the cannister I didn't know the bolt had a seal as the filter I bought of ebay didn't come with a seal for that bolt only the...
I actually looked at the part that had oil on it ( there are 2 leaks) it's the flywheel housing that's dripping oddly I found a post you put up about doing it in situ but couldn't open the link that you gave someone so I think it's the crank seal...
Thanks I am new to landrovers its my first one I done an oil change and made it worse but it covered with oil on the front crossmember before I starred the oil filter I got came with just one seal ( the big round one) I can't find out where to...
Hi all can anybody tell me if there is a decent landrover repair garage or mobile guy in or around South Walles I can go from Pontypool or Swansea areas if possible looking to repair a serious oil leak think it's a failed seal and also a slow...
I have nearly the same problem ? I have just bought a 1973 series 3 petrol ( no servo fitted) The brakes are terrible I know drum brakes are not great but surely they never made brakes like these when it was new ? I haven't had time to look at it...